|
|||||||||
|
Thread Tools | Search this Thread |
September 21st, 2009, 12:06 PM | #1 |
Inner Circle
Join Date: Jun 2005
Location: Saskatchewan
Posts: 3,048
|
xlh1a uncompressed capture
Good Morning,
I was wondering if uncompressed capture is possible in the A version sense it does not have a serial digital interface. can one use an intensity pro card which has hdmi, use a component converter plug and capture uncompressed? If one can do that would it come out native 4:2:2. that would sidestep using cineform codec whcih palces it in 4:2:2 and is great for color correcting. Is it even possible? thanks for any information.
__________________
DATS ALL FOLKS Dale W. Guthormsen |
September 21st, 2009, 12:28 PM | #2 |
Trustee
Join Date: Dec 2007
Location: Glasgow, Scotland
Posts: 1,546
|
I remember seeing a few different posts about this, and did a search for "uncompressed" on the Canon XL H Series HDV Camcorders forum. Here's some for starters:
http://www.dvinfo.net/forum/canon-xh...nt-output.html http://www.dvinfo.net/forum/canon-xh...l-verdict.html http://www.dvinfo.net/forum/canon-xh...stead-hdv.html Last edited by Colin McDonald; September 21st, 2009 at 01:37 PM. Reason: Rephrased - it came across a bit rude, sorry |
September 27th, 2009, 09:16 AM | #3 |
Inner Circle
Join Date: Jun 2005
Location: Saskatchewan
Posts: 3,048
|
Good afternoon,
It appears one can do it but one must capture directly to the computer hard drive. does than mean you could also capture native to a fs 4??? If you are capturing to hard drive and tape (as back up lets say) would the hard drive be uncompressed and the tape be hdv? is that even possible?
__________________
DATS ALL FOLKS Dale W. Guthormsen |
| ||||||
|
Thread Tools | Search this Thread |
|