Recording to NF without tape at DVinfo.net

Robin Probyn · March 20th, 2010, 08:04 PM

If I set the seed function for TC to be generated in the nanoflash.. it will run TC when I press the record button on the nano.. but will audio come from the HD SDI out of the camera in this mode,as well as picture..

Thanks

Dan Keaton · March 20th, 2010, 10:50 PM

Dear Robin,

If audio is embedded in the HD-SDI stream, and you have audio set to Embdded, the nanoFlash will record audio regardless of whether you trigger via incrementing timecode, or any other method such as the record button or remote control switch.

The same applies if you are using the external analog audio inputs.

Robin Probyn · March 21st, 2010, 12:54 AM

Hi Dan

Ok thanks for the prompt response as ever !!

March 20th, 2010, 08:04 PM	#1
Robin Probyn Major Player Join Date: Jan 2010 Location: Tokyo Posts: 590	Recording to NF without tape If I set the seed function for TC to be generated in the nanoflash.. it will run TC when I press the record button on the nano.. but will audio come from the HD SDI out of the camera in this mode,as well as picture.. Thanks

March 20th, 2010, 10:50 PM	#2
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Robin, If audio is embedded in the HD-SDI stream, and you have audio set to Embdded, the nanoFlash will record audio regardless of whether you trigger via incrementing timecode, or any other method such as the record button or remote control switch. The same applies if you are using the external analog audio inputs. __________________ Dan Keaton Augusta Georgia

March 21st, 2010, 12:54 AM	#3
Robin Probyn Major Player Join Date: Jan 2010 Location: Tokyo Posts: 590	Hi Dan Ok thanks for the prompt response as ever !!