|
|||||||||
|
Thread Tools | Search this Thread |
March 27th, 2008, 03:01 PM | #1 |
Inner Circle
Join Date: Dec 2005
Location: Rhode Island
Posts: 4,048
|
FCP 6 Dissolve problem
I am trying to add dissolves and something has changed because I have a new problem.
I can click the cut and type command T and the dissolve appears but only starts on the cut and goes for 1 frame. My dissolve is set for 1 sec 15 frames. Now some of the cuts it works fine and some it does not. I have checked that the video either side of the cut has enough room so that is not the problem. What am I missing? |
March 27th, 2008, 03:03 PM | #2 |
Inner Circle
Join Date: Dec 2005
Location: Rhode Island
Posts: 4,048
|
Never mind a reboot solved the problem.
|
March 27th, 2008, 09:01 PM | #3 |
Trustee
Join Date: Apr 2006
Location: United States
Posts: 1,158
|
zoom in. you probably have a 1 frame gap between the clips... or you really don't have the media, or... trash FCP prefs
|
March 28th, 2008, 07:34 AM | #4 |
Inner Circle
Join Date: Dec 2005
Location: Rhode Island
Posts: 4,048
|
Thanks Steve but no blank frames. Weird a reboot has solved it.
|
| ||||||
|
Thread Tools | Search this Thread |
|