Mounting JVC DR-HD100 PORTABLE RECORDER on Anton Bauer at DVinfo.net

Robert Castiglione · May 23rd, 2008, 04:11 AM

Hi there,

I have succumbed and am just going to get the DR-HD100 hard drive and want to make sure I have all the bits and pieces I need.

I am going to use the Anton Bauer ABWMK-HD100 Firestore Mounting Plate Kit to put the hard drive on. My question is whether the hard drive mounts directly on to this or whether you have to purchase the first store mount cradle to hold the hard drive?

Many thanks.

Rob

Joseph A. Benoit · May 23rd, 2008, 08:45 AM

Hello Robert

I had to buy a cradle for my DR HD100.

If you buy a DR 100 may sure you buy the 180 min. battery, the stock 90 min battery SUCKS

Eric Darling · May 23rd, 2008, 10:00 AM

I bought the Switronix NP-L168 in an effort to kill two birds with a stone. It is both the power supply and the holder for the DR-HD100. It works as advertised, but there are two (relatively minor) annoyances.

1) It mounts high - something that sometimes causes issues since I'm a tall shooter, and it raises the camera's profile. And, it mounts on the handle, making it harder to use the handle without finding it getting in my way.

2) I have a good supply of NP-1 batteries (which is what this contraption takes as a power source), but I always get a warning in the viewfinder that the voltage is low for the external recorder. The drive is looking for 15VDC, and of course, NP-1s deliver something along the lines of 14.4. So, it works, but the warning is annoying.

Also, when I bought the thing, it didn't come with the NECESSARY cable to connect to the DR-HD100 unit's base. I had to buy it separately, and that wasn't just annoying, it was downright stupid.

May 23rd, 2008, 04:11 AM	#1
Robert Castiglione Major Player Join Date: Mar 2003 Location: Fremantle, Western Australia Posts: 253	Mounting JVC DR-HD100 PORTABLE RECORDER on Anton Bauer Hi there, I have succumbed and am just going to get the DR-HD100 hard drive and want to make sure I have all the bits and pieces I need. I am going to use the Anton Bauer ABWMK-HD100 Firestore Mounting Plate Kit to put the hard drive on. My question is whether the hard drive mounts directly on to this or whether you have to purchase the first store mount cradle to hold the hard drive? Many thanks. Rob

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

May 23rd, 2008, 08:45 AM	#2
Joseph A. Benoit Major Player Join Date: Feb 2007 Location: Coconut Creek FL Posts: 291	Hello Robert I had to buy a cradle for my DR HD100. If you buy a DR 100 may sure you buy the 180 min. battery, the stock 90 min battery SUCKS

May 23rd, 2008, 10:00 AM	#3
Eric Darling Major Player Join Date: Jun 2006 Location: Savannah, GA Posts: 463	I bought the Switronix NP-L168 in an effort to kill two birds with a stone. It is both the power supply and the holder for the DR-HD100. It works as advertised, but there are two (relatively minor) annoyances. 1) It mounts high - something that sometimes causes issues since I'm a tall shooter, and it raises the camera's profile. And, it mounts on the handle, making it harder to use the handle without finding it getting in my way. 2) I have a good supply of NP-1 batteries (which is what this contraption takes as a power source), but I always get a warning in the viewfinder that the voltage is low for the external recorder. The drive is looking for 15VDC, and of course, NP-1s deliver something along the lines of 14.4. So, it works, but the warning is annoying. Also, when I bought the thing, it didn't come with the NECESSARY cable to connect to the DR-HD100 unit's base. I had to buy it separately, and that wasn't just annoying, it was downright stupid.