HD100 supports PCM audio record/playback

John Mitchell · October 21st, 2005, 12:51 AM

Quote:

Originally Posted by Andrew Young

Could you please detail the steps you used to capture this audio? I have tried many combinations of settings and nothing has worked. I am using HDV30p material with the BR-HD50 deck and FCP5.0.2. When both sides are set to DV the clips capture but there is no audio. When the deck is set to output DV on both the switch and menu there is no audio, but when either the switch or the menu is set to DV, FCP (which is in DV mode) does not recognize the deck, or tells me it cannot capture because there is no video (in spite of the fact that it is set up as an audio only capture). I'd love to know how you made it work.

Andy

Reading Steve's original post he said he managed to do it WITHOUT deck control... manual record. Plus it sounds like he was doing it straight off the camera not through the deck:

Quote:

Originally Posted by Steve Mullen

We know the HD100 does not downconvert HDV to DV. So when you switch the 1394 switch to DV and set the playback mode to DV -- nothing should come out of the 1394 port.

Yet there is a signal -- one that can be captured as "NTSC DV 48 kHz" WITHOUT video. (Also, with no real device control.)

Steve Mullen · October 21st, 2005, 01:43 AM

[QUOTE=Andrew Young]

Quote:

Originally Posted by Steve Mullen

I'd love to know how you made it work.

Andy

So would I as I can't get the PCM audio anymore. But when I told JVC I was having trouble, they said keep trying! They recommended playing on a normal DV camcorder. Which I will try.

They seem very sure PCM was implemented.

Werner Wesp · October 21st, 2005, 02:14 AM

It's still weird. One would expect they (JVC) marketed that as a selling point - as it really is that...

Instead they seem very, very quiet about it...

Steve Mullen · October 21st, 2005, 12:49 PM

Quote:

Originally Posted by Werner Wesp

It's still weird. One would expect they (JVC) marketed that as a selling point - as it really is that...

Instead they seem very, very quiet about it...

THey say they want NLE companies to support it before they go public.

David -- will CineForm support it?

David Tamés · May 30th, 2006, 11:33 PM

You'll find an important conclusion of this thread in Steve post in this thread at http://www.dvinfo.net/conf/showthread.php?t=68403 where Steve Mullen writes:

Quote:

Originally Posted by Steve Mullen

The thread pointed to does not have the complete story. Yes, one channel pf PCM audio is recorded. But, it is very distorted and so is unusable!!!

It must have been either an error in design or an experiment. For example, it being there does allow software to be developed to "get" it.

I wonder if the 200 and 250 will have PCM audio?

October 21st, 2005, 02:14 AM	#18
Werner Wesp Major Player Join Date: Aug 2005 Location: Belgium Posts: 497	It's still weird. One would expect they (JVC) marketed that as a selling point - as it really is that... Instead they seem very, very quiet about it...