DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Private Classifieds (https://www.dvinfo.net/forum/private-classifieds/)
-   -   Private Classifieds listings from 2005 (https://www.dvinfo.net/forum/private-classifieds/22441-private-classifieds-listings-2005-a.html)

Eniola Akintoye July 25th, 2005 03:17 PM

IMAC G5 Wanted
 
I am in need of an Imac G5.

20-inch
2.0GHz
1+ MB Ram

20-inch widescreen LCD
2GHz PowerPC G5
667MHz frontside bus
512K L2 cache
1GB+ DDR400 SDRAM
160GB Serial ATA hard drive
Slot-load 8x SuperDrive (double-layer)
ATI Radeon 9600
128MB DDR video memory
56K internal modem
Wireless
DVD/CD Combo Burner.

Greg Boston July 26th, 2005 12:11 AM

The specs you are quoting apply to the 'just released' Imac G5. I doubt you will find anyone parting with a used one since they won't have had time for the new to wear off yet. You will likely have to buy it new for $1799.00

Good Luck,

-gb-

Jason J. Gullickson July 26th, 2005 09:57 AM

Charles, what did you think of the JR? We've been experimenting with hand-made rigs (I have access to alot of engineering/machining talent) and are trying to decide if we want to build something better or if we should just buy off-the-shelf. The price is right for the JR, but I wasn't sure if we could do better ourselves.

We're shooting with small cameras now and the biggest thing I can see us using in the near future is a Sony HDR-FX1.

(if you posted something about this elsewhere just a pointer in the right direction is appreciated, I looked but I didn't see anything).

Charles Papert July 26th, 2005 10:20 AM

Jason;

I would point you towards the homebuilt stabilizer site, http://homebuiltstabilizers.com/, if you haven't been there already. A system with a vest and arm might serve you better in the long run than a handheld system. The primary reason I could see to get a JR rather than build something yourself would be that you consider the hours of building and tweaking to be worth less than what it would cost to buy the JR.

Jason J. Gullickson July 26th, 2005 11:52 AM

Thanks Charles, homebuiltstabilizers.com has definately been a source of inspiration for the work we have done so far :)

We're getting to a point where our productions are getting large enough that we don't have as much time to build everything from scratch like we used to, so I'm really on the fence with this one. I know that experience plays a large part of getting the most out of any sort of stabilizer so I was curious how you felt about the JR and what sort of results you were able to obtain with it.

Do you have any examples of work you've done using the JR or was it more for personal/private use? You mentioned Zach borrowing it, is the work he did with it avaliable for viewing?

Thanks again Charles.

Charles Papert July 26th, 2005 12:15 PM

I hadn't used the JR for many years, which is why I sold it. The couple of jobs I did with it were in the early '90's, don't even have copies of it. I will say that even as a big-rig operator where many of the skills were transferable, the JR did require me to learn new skills and keep on top of it.

Zach borrowed my JR to do walk-throughs for a music video he was directing. He couldn't get either of his DV cameras to balance (I had warned him about that process) and thought it was a pain in the arse!

If you spend plenty of time with the JR you can make some great shots. It does require constant fiddling for balance, but it does have the quickest controls for balance amongst its competitors (I think--I haven't kept up with all of the other rigs out there).

Jason J. Gullickson July 26th, 2005 01:10 PM

Thanks again for the info Charles, if I end up in LA sometime I owe you a coke :)

Next time you talk to Zach tell him we loved Garden State.

Bill Rankin July 26th, 2005 02:13 PM

Sold
 
The GL2 has been sold.

Dawn Adamez July 26th, 2005 05:00 PM

I have a ....

SHURE Wireless Lavalier UP-14 & SHURE WL 5/B SHURE UP Wireless System w/ wireless Lavalier microphone Contains 10 groups of compatible channels. Magnet mount, dual tie clip, swiveling lapel clip, pin mount, carrying case Will Email pictures 410-984-1025

Dawn Adamez July 26th, 2005 05:05 PM

LOWELL DV CREATOR LIGHTING KIT 55w/Lamps
 
LOWELL DV CREATOR LIGHTING KIT 55w/Lamps

LOWELL DV Creator kit contains Rifa Lite55, Pro Light, Omni- Light Barndoors,Umbrella, Gel Frames, Flag, Light Stands and hard carrying case Will Email pictures 410-984-1025 dawn7dave7@msn.com Price open for negotiation... All fair offers considered.

Dylan Couper July 26th, 2005 07:23 PM

(psst... post your price please. thanks!)

Dawn Adamez July 26th, 2005 07:52 PM

SHURE Wireless Lavalier UP-14 & SHURE WL
 
SHURE Wireless Lavalier UP-14 & SHURE WL 5/B SHURE UP Wireless System w/ wireless Lavalier microphone Contains 10 groups of compatible channels. Magnet mount, dual tie clip, swiveling lapel clip, pin mount, carrying case Will Email pictures 410-984-1025 dawn7dave7@msn.com All fair offers considered.

Betsy Moore July 26th, 2005 11:13 PM

Hi, I can't find this model on the web, do you have a link to a site where I can see pics prices of new ones? Thanks

Kevin Wild July 26th, 2005 11:51 PM

www.dvcreators.net

Great site with some good informational videos on products.

KW

Carl Creasey July 27th, 2005 06:27 AM

is this it?
 
is this the kit?

http://www.lowel.com/kits/DVcreator1.html

Phil MacDonald July 27th, 2005 07:56 AM

Camera still for sale, except asking price is $1500...

Dawn Adamez July 27th, 2005 08:17 AM

This is the kit!!)

http://www.lowel.com/kits/DVcreator55.html

Dawn Adamez July 27th, 2005 08:21 AM

I have the following...Let me know if interested.


Monitor Specs:

23" Cinema High Definition Widescreen Display
power-on touch panel
USB ports on rear of monitor

Computer specs:

Dual 2GHz PowerMac G5
1Ghz front side bus per processor
1.5 GB DDR400 SDRAM (expandable to 8GB!)
512k L2 cache
(2) 250 GB Internal 7200RPM Hard Drives
Single layer 4x Super Drive. Will do DVD +/-, DVDROM, CDROM, CD-R/W
ATI Radeon 9600 (128MB memory)
Internal 10/100
56k modem
Front and Rear USB 2.0
Front and Rear firewire 400/800
Optical Audio Output
DVI to VGA adapter
Airport antenna

Yeong Chia July 27th, 2005 09:11 AM

Push~~~~``````````````
Quote:

Originally Posted by Yeong Chia
I have 7 pcs SONY BP-GL95, selling USD400.00 for one.


Yeong Chia July 27th, 2005 09:13 AM

Push ~~~~~~~~~~\
USD6300.00 now

Sam Forbes July 27th, 2005 10:01 AM

Canon WD58 wide angle lens
 
Canon wide angle lens. 58mm thread mount. Mint condition and comes with lens caps for both ends, protective lens hood, and case.
$100 shipped.

Aaron Ferguson July 27th, 2005 11:34 AM

Sent you an email about it..

David Malouin July 27th, 2005 12:37 PM

how much new?
 
curious, how much were the units purchased for? how old are they? how much use have they had?

thanks

david

Patrick Smith July 27th, 2005 02:22 PM

bump!

this is a great deal.

Dawn Adamez July 27th, 2005 03:46 PM

I purchased the entire system for $1,500. new on 4-30-04. They were used for one small project. They have just a few hours of use. This system has been packed in the case. It is basically brand new.

Saturnin Kondratiew July 27th, 2005 06:04 PM

FS: sony pd150 & sony playback deck gv0d1000
 
both items for sale
asking 2000us for the pd150 -comes with 2 batteries, ac adapter, 2 microphones, etc...
and
sony walkman gv-d1000 unit asking 800us

both are in awesome working condition
thnx

Andrew Hsu July 27th, 2005 07:53 PM

did you get one yet? I'm looking too. wonder how much you got yours for and where - if you found one, that is.

Thanks,
Andrew Hsu
Morning Star Videography

Fred Finn July 27th, 2005 07:55 PM

2 19" Viewsonic CRT's for sale
 
I have two viewsonic CRT's for sale. They are the a90f+ and the a91f+. I got them both within a month of each other last winter. So they are new and are in great shape! They are a bit pricey to ship, but it is possible. They are in Lincoln Nebraska if pick up is an option for you. I'm looking for about 150.00 a piece. They are in the 200.00 range brand new. That's 150.00 for each one, or 300.00 for the pair.

Thanks,

Fred

David Lach July 27th, 2005 08:01 PM

I bought a 14x instead, which turned out to be much less expensive and as useful to me (think I paid $500 for mine).


EDIT:
Sorry I changed my response as I thought you were asking about the FU-1000 for some reason (I was also looking for one at some point). I worked too long on my computer I guess. Can't see clearly anymore.

The 16x can fairly easily be found on eBay for less than $1000. I've seen a bunch of them in the last few months.

Richard Alvarez July 27th, 2005 08:05 PM

800 to 900 seems to be the going rate for the 16x on Ebay. Bout the same for the 14x and 3x as well.

Leonardo Silva Jr. July 27th, 2005 09:04 PM

Still available? if so, my sister in California can do transaction...she's about to buy a new one...

Leonardo Silva Jr. July 27th, 2005 09:08 PM

can you post your price?

Torrey C. Harris July 27th, 2005 10:15 PM

you want 2000.00 (us )for both of them?

Rick Step July 28th, 2005 12:28 AM

XL2 for Sale
 
I am getting ready to sell my XL2. It has all the papers, reciepts, box, ect. I am not going to be in production for quite a while and it makes no sense to let it sit. It is in perfect condition and will be under warrenty until mid october. Besides that, just email me for pics or if you have any questions at rick@prospectmovie.com ... thanks,

Rick

Dennis Sladek July 28th, 2005 01:36 AM

DVC80 For Sale
 
Panasonic DVC80 has 16 (yes only sixteen) checkable hours.
All original components plus UV Filter. I'm the original owner and I've mostly shot using DV Rack, that is why the hours are very low.

Make me an offer.

sladek@core.com

Jon Wivell July 28th, 2005 02:51 AM

George, I have an XL2 and have been considering my options for either selling it, or moving to a Panasonic.

Is your package still for sale?

Jesse Parsh July 28th, 2005 07:08 AM

Ebay doesn't have a shortage of GL1's, you can get a GL1 from Ebay for around $1,000. I just bought one for just over $1,000.

Jimmy McKenzie July 28th, 2005 07:18 AM

Price?
 
How much???

Fred Finn July 28th, 2005 08:26 AM

Here are the specs at the manufacturer webpage. http://viewsonic.com/products/deskto.../aseries/a91f/

I looked up shipping and it's right around $25.00 to ship, so it's not toooo bad. These make a great editing setup!

Dan Mumford July 28th, 2005 10:29 AM

XL-2 For Sale
 
I've found my XL-2 to be a bit much for my needs. Arthritis says I can't lug such a large camera around all day. I bought this camera February 20,2005 and it has less than 10 tapes used in it. It is in mint condition and never used as a VTR (I have a Sony GV-D1000)

XL-2 and all the original accessories
Anton Bauer Hytron Battery, Titan 70 charger/power supply, and QRXL12 Gold Mount for XL1S and XL2
Mack 2 year extended warranty
Porta Brace CC-210-PW Quick-Draw Professional Camcorder Case
Porta Brace RS-XL2 RAIN SLICKER f/XL-2

First $5,000 takes it. Postal Money Order or PayPal

Edit: I also have a Tiffen UV filter I bought at the same time as the camera. It has been on all the time for lens protection.

Dan


All times are GMT -6. The time now is 06:14 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network