Re: Manfrotto 3021 Tripod w/ 3063 Head $115
 

Jim,

A couple of questions. How tall is this tripod with all leg sections extended but without the central column?

How would you rate the pan/tilt smoothness (for video) compared to say a Manfrotto 503 head?

Thanks,

Re: Manfrotto 3021 Tripod w/ 3063 Head $115
 

Hi Ervin,

- It is 5 feet from the floor to the top of the head/camera plate with all leg sections extended but without the central column.

-I have a Manfrotto 501 head, and I think that it is comparable to that in terms of pan/tilt smoothness. There are no pan/tilt drag adjustments on the 3063 like on the 501, just pan/tilt locks. I would say that the pan tilt smoothness is comparable to a midpoint pan/tilt drag setting on the 501, which for me is perfect. But If you prefer adjustable pan/tilt drag, then you need to look at a more expensive head.

I have used this setup for years as both a backup and as a main tripod/head setup, with everything from full sized shoulder mount to compact handycams, and it has served me well. Hope this helps.

Jim

Re: Lowel DV Creator 1 Kit plus extras
 

Open to offers.

Re: Lowel DV Creator 1 Kit plus extras
 

Chris, would you piece out what you have there? Maybe list what you'd charge? I don't need another omni but I might take the tota...

Re: Lowel DV Creator 1 Kit plus extras
 

If you've only used the hard-case Lowel kits, you'll really like the soft-case, at least I did. So much nicer for typical use in and out of cars and rooms...

Re: Lowel DV Creator 1 Kit plus extras
 

If you do part it out, I have spare Totas and would love another Omni and Pro.

Vinten vision blue head
 

Hi guys
Looking for a vision blue head....cash waiting.
Mat

Re: Lowel DV Creator 1 Kit plus extras
 

I'd like to buy the Vortex DVD from you.

Letus Mattebox Kit
 

Selling a brand spanking new Letus Mattebox. Never got used and just selling off before it sits around any longer. This is the standard kit exactly as shown here:

http://www.letusdirect.com/cart/letu...ndard-kit.html

I'm also including the 80mm lens clamp (also brand new) that is an extra $199. The clamp can be seen here:

http://www.letusdirect.com/cart/letu...ens-clamp.html

Retail on this kit is $1,098.00. Asking $875 shipped to anywhere in the USA.

Upgrade your wireless, Audio-Technica ATW-1821C
 

Great condition. Just $600. Credit cards accepted.

http://www.bhphotovideo.com/c/product/706536-REG/Audio_Technica_ATW_1821C_ATW_1821C_Dual_Wireless.html

Two completely independent receiver channels in a single unit, for simultaneous operation of two microphones (dual-channel systems)

Compact receiver is easy to mount on a camera

UHF reception with 996 frequencies selectable in 25 kHz steps

Automatic frequency scanning for easy selection of open channels

Tone Lock squelch system eliminates interference when transmitter is off

Two independent balanced outputs (dual-channel systems)

Headphone monitor output with independent level control

Battery fuel-level indicators on transmitters and receiver

Soft-touch controls for easy frequency selection

True Diversity operation for resistance to multi-path interference and dropouts

LCD frequency and battery status display with backlight

Antenna and AF Peak LED indicators

Dual-channel receiver can operate in single-receiver mode to extend battery life when only one audio channel is in use (dual-channel systems)

Transmitters operate in low or high transmission modes to conserve battery life/maximize power

Easy, user-friendly operation

Clear, natural sound quality

Powered by AA batteries

Re: Manfrotto 3021 Tripod w/ 3063 Head $115
 

PM on the way.

Thank you,

Re: Glidetrack HD + rail $300 Like New
 

Price dropped to $275.

Re: Lowel DV Creator 1 Kit plus extras
 

Thanks guys, but I'm just going to offer it as a set.

Re: 35mm F0.95 for NEX - E-mount
 

bump........

Steadicam Merlin v1 - used but brand new
 

I have some extra pieces of equipment I am trying to get rid of at the moment. Currently it is located in Montreal but will meet up around the area and will ship CONUS no problem.

Its a Steadicam Merlin v1 - used but basically brand new. No big scratches, scuffs, anything. If you want more detailed photos just post here and Ill post pics up asap. It genuinely is in really good condition.

New the v2s go for $799 on BHPhoto, but this is used, and a v1, so $350?

http://farm9.staticflickr.com/8496/8...2990564e_b.jpg