Canon XH-G1/A1 rain cover
 

Purchased a Porta Brace RS-XHAG1 Mini-DV Rain Slicker...never used it...don't need it...time to sell it. (but it does seem to work well...fits nice and comfortable around the camera)

$160

thanks
jeremiah

bogen tripod
 

I've had this for a while. Someone gave it to me. Its a fine tripod but I don't ever use it..no need for it right now...

Bogen 3046 legs
Bogen 3047 head

$300 (includes s&h)

www.jerfilm.com/tripod.jpg

thanks
jeremiah

Okay, I'm willing to pay for ground shipping. This originally cost me about $529. I'll wait for about a week before I put it up on Ebay.

Ray

Update/Bump

Libec tripod sold.

Canon XH-A1 STILL AVAILABLE. "LIKE NEW" CONDITION MUST GOO!!

Final Cut Express still available.

PM if intrested

I can accept paypal

Canon XH-A1 with 4 Sony Premium 63 Minute HDV tapes and 1 Canon Professional tape, and Hoya 72 mm super multicoated are still available as a package. $3100 if paid by paypal, $3000 if bank treasure's check sent. Buyer pays for shipping. Thanks.

FS:After Effects Books
 

I have two books for sale for $40. They are "Creating Motion Graphics with After Effects" and "After Effects in Production". Both books written by Trish & Chris Meyer.

Shipping included.


Thanks,
Ray

FS: 80GB iPod Video + TONS of extras
 

Got the new iPhone and just dont need this any more. Very good condition but it DOES have my name/number inscribed on the back by Apple. Includes the iPod (latest version), original box, USB charge/sync cable, docs, etc. plus the following extras.

- silicone case (cheapish but works good)
- retractable USB charge cable
- retractable video cable
- Belkin TuneBase FM car charger / FM transmitter $79 value http://www.compusa.com/products/prod...ct_code=337776
- iFidelity Ipod Audio System (great boom box with remote) $89 value http://cgi.ebay.com/IFIDELITY-IPOD-A...mZ190105383427


First $350 shipped get everything. Trades considered for video gear.



ash =o) AshG@ashVID.com

Go here for the 60cm Carbon Fiber rod.

http://www.cinevate.com/catalog/prod...products_id=61

I got them and it is lighter than my old 25cm stainless steel rods

Hi just wondering, this fits the XL2 mount right ? It doesnt go on the end of the stock lens ???

Shipping is 6 euros within E.U + 2 euros more if you want it registered

Ray, would you mind to email me (i a n s a l i m --at-- yahoo.com) pictures of your MultiRigPro with the padded belt? Thanks

Here's the link to the picture.

http://www.flickr.com/photos/rayjun/740025842/


Ray

Okay, I will sell the Smooth Shooter separately for $1100 plus shipping (if you do a bank wire, shipping will be free)

The Glidecam will not be available if I split it (I have someone interested).

So:
Full package is still available for $1400
Smooth Shooter separately will sell for $1100

No, the FE version goes on the end of the stock lens. You're looking for the XL version.

Forgot to update here, this has been sold already.

Sony DMX-P01 24-Bit Digital 4-Channel Mixer
 

Hi,

I am selling my Sony DMX-P01 Digital Mixer. It is in great cosmetic condition, and functions perfectly. This mixer really does sound great! I used it primarily for my video business so it has been kept at all times in my audio bag.

If you are looking for a great mixer for a great price, this is it!

Items included in this sale:
Sony DMX-P01 Digital Four Channel Mixer (24/48 or 24/96 sampling rates)
Original box and packing materials
Original owners manual
12-pin multi-connector
Meter scale sheets (6 types)
Battery Holders (x2)
Operation instruction CD-ROM

Check out this link for more detailed information: http://www.starin.info//Product%20In...ve/DMX-P01.pdf

I would like to get $1,300.00 shipped + Paypal fees. I will only accept Paypal for this sale. Thanks!

Here are some photos:

http://i6.photobucket.com/albums/y20...ror/sony01.jpg

http://i6.photobucket.com/albums/y20...ror/sony02.jpg

http://i6.photobucket.com/albums/y20...ror/sony03.jpg

http://i6.photobucket.com/albums/y20...ror/sony04.jpg

http://i6.photobucket.com/albums/y20...ror/sony05.jpg

http://i6.photobucket.com/albums/y20...ror/sony06.jpg

http://i6.photobucket.com/albums/y20...ror/sony07.jpg

http://i6.photobucket.com/albums/y20...ror/sony08.jpg

FS: Oade Basic Mod Marantz PMD671 24-Bit Recorder
 

Hi,

I am selling my Oade Basic Mod Marantz PMD671 recorder. It is in great cosmetic condition, and functions perfectly.

Items included in this sale:
Oade Basic Mod Marantz PMD671 recorder
Original box and packing materials
Unused/unopened USB cable
Unused/unopened battery sled
AC power supply
Shoulder strap
Original users manual is not included, however I will include a pdf version on CD-R

I used this for recording court room dialogue for a video client of mine.

From the Oade website:

Basic MOD
The basic MOD keeps all features intact and reduces the mic preamp hiss thru the XLR connections as well as the built in mics.

I am looking to get $700.00 shipped + Paypal fees.

http://i6.photobucket.com/albums/y20.../marantz01.jpg

http://i6.photobucket.com/albums/y20.../marantz02.jpg

http://i6.photobucket.com/albums/y20.../marantz03.jpg

http://i6.photobucket.com/albums/y20.../marantz04.jpg

http://i6.photobucket.com/albums/y20.../marantz05.jpg

http://i6.photobucket.com/albums/y20.../marantz06.jpg

http://i6.photobucket.com/albums/y20.../marantz07.jpg

http://i6.photobucket.com/albums/y20.../marantz08.jpg

Century Optics/Vocus Mattebox for XL series cameras
 

I have a Century Optics/Vocus Mattebox for my XL-H1 that I rarely use, so I figured I 'd sell it here for anyone interested. It was bought from B&H and the link is below:

http://www.bhphotovideo.com/c/produc...Matte_Box.html

I'm looking for $1000 if anyone is interested. Let me know.

Sold
 

The Sony DMX-P01 Digital Mixer has been sold. Thanks for looking.

At this point I would like to sell the bundle together.

It is an 828 Mk I

WTB: M2, FS100, P2cards, and lot more.
 

Hi Folks!

All the gear I will list I will pay internationally by paypal, I will just want you to send it to my address in San Francisco. I have 2 months to build up a whole HVX system.

HD M2 (with rods, hard mount, lenses..) From U$ 900 to 1300,
FS 100 ( Version 3.0, long batteries) From U$ 800 to 1100,
P2 Cards (4 or 8Gb, 2 of each) Best price
526 Bogen/Manfrotto Tripod, Best price
7" external monitor, Best price
Steadicam Flyer, (I know that is difficult to find, but...) Best Price
Micro FF, Best price

This is for my second unit HVX200, as you can notice I only have the camera.
Please provide me with pictures in the first contact.
Send a message to lrmproducer@gmail.

Best Wishes

Looking for Panasonic DVX 100
 

Bumping to see if there are other dvx 100' for sale.

WTB Vinten Vision 3
 

I'm looking to purchase a Vinten Vision 3 head. I'm open to head and legs or just the head, depending on the price.

Thanks,

Vence Vida

One more bump.

wtb dvx100a or b
 

Looking to purchase a dvx100 with less than 200 hours, must be in great condition. Im just getting started so I really need to stay within 1750.00 - 1850.00 for the camera. I may be able to do better than that however, thats pushing it for me. Willing to purchase now. Respond to this post or contact me @ n2health@hotmail.com.
Robyne

Eugene Kim, Rolls Mixer
 

Eugene: If you advertise items for sale at least have the courtesy to answer the prospective buyers e mails. I have sent 3 e mail messages to the address listed with your name on this forum. I wanted to buy the rolls MX422 mixer for the price you advertised.

Robyne a few threads done Charles Papert is selling his 100a :)

$325 shipped or off to eBay on Monday



ash =o)

Sale complete, the mic arrived as expected - thanks Eugene!

Hi, I'm sorry, but let's just say there was a "death in the family." Well, that's as close as I can say to how I feel right now, there were extenuating circumstances that hit me at that exact time, and now I have to get ready for a three week long project straight starting Monday.

That...and I apparently broke the mixer when I took it apart to recalibrate the meters. I must have pushed too hard or something on the three input gain knobs on the back when trying to close it back up quickly, as the capacitors powering three of them cracked, in other words, only channel 2 wouldn't work.

Sorry about all this, but obviously that coupled with everything else piling down on me at the same time...believe me, I'm normally more courteous than that.

I was going to try and fix the mixer first by myself by replacing the capacitors at an electronics part store, but then the stuff/world come crashing down overnight thing happened.

In any case, I don't think you'd want mine anymore for obvious reasons. I also wouldn't be able to ship it anymore either as I will be working from morning to virtually midnight everyday including weekends for the next three weeks.

This said, Rolls e-mailed me saying they would replace the capacitors for me and retune the calibration for me, for free as well, while they were at it. Their customer service is wonderful, and the thing's not even under warranty anymore.

As far as low-cost mixers go, the Rolls is very easy to use, and I would highly recommend it. However, for a very hot line level like with the A1, it doesn't quite output a high enough signal for efficient linking/optimal calibration (works very well though when you use the -30db output pad and the A1 in mic input mode, or with the A1's 20db pad)

On the other hand, it would mate very well out of the box with say something like the DVX in live level out I feel.

Also, you can buy the 21' breakaway cable for the Sound Devices 302 mixer on Ebay from Alchemy Audio, and it works perfectly with the Rolls MX-422 with a simple 1/8" female stereo to 1/4" stereo male adapter.

Another tip is that the master volume control fader on the front, should be set at about 3/4 of the way. Unity range is typically 1/2 to the 3/4 mark on fader knobs, and the manual recommends that you try to keep the master volume control set at the 1/2 mark for maximum variance and headroom. I have not found that to be the best practice most of the time with this mixer.

The course input gain knobs on the back (the things I apparently busted much to my chagrin *just* as I was about to sell it), kick in really strong towards the last 1/4th of their travel. The gain is tremendous and a great thing creating really "hot" microphone pickup for boom work, however, when you get to that 3/4 mark you add by far a much more noticeable increase in noise. The master volume pot, however, adds the least amount of noise overall, so keeping the course input trim knobs on the back at *just* below their 3/4 mark, and the master fader set at the 3/4 mark, and the individual channel faders (which generate noticeably more noise than the master fader) operating at around 1/2 to 60-65%, generally created the best signal to noise ratio for me with this mixer.

Hope this helps, and again sorry, about not getting back to you...but sometimes that's just how life is, things happen and things break, at the worst possible time.

fs: anton bauer gold mount and adapter for canon xl1, xl2, xlh1
 

up for sale is an anton bauer qr-xl-1/2-c gold mount for the canon xl cameras. battery plate will mount to the ma100/200 on the xl1 or xl1s, or the accessory plate on the xl2 and xlh1. the gold mount has a power adapter that will convert battery power to 7.2v, so a single battery can power your camera, light, firestore, and most other camera accessories (with the appropriate cables). kit includes the gold mount, back plate, all screws, and documentation.

this is the discontinued version, essentially the same unit as the current one except in a slightly different form factor.

http://www.bhphotovideo.com/bnh/cont...ughType=search

asking $85.00 shipped.

fs: k-tek 3/8" threaded camera microphone ring adapter for canon & sony cams
 

left over from my xl2, this adapter fits into the mic mount available on some sony and all canon xl cameras (it's a wee bit too big for the mic mount on the xh cameras, but will work with a tight fit). it gives you the ability to screw on the k-tek kssm, or any compatible 3/8" shock mount, to your camera.

some pics from the k-tek site:
http://www.mklemme.com/pole/kbwc.html

http://www.bhphotovideo.com/c/produc...ed_Camera.html

asking $15 shipped.

If picked up in Los Angeles, $1900.

A couple of films that I did with the DVX, plus an article from the International Cinematographer's Guild magazine largely about another one that I shot with the DVX, for those interested:

http://homepage.mac.com/chupap/Film/...Theater32.html

Items sold

Alexis

FS: Cam-kote in Mossy oak Break -up
 

Cam-kote for sale in mossy oak camoflage
for info go to www.cam-kote.com
this model will fit everything from a canon xl-1 to a sony dsr-300 series camera

75.00 shipped
pics upon request
any questions e-mail me or call me

torrey
1-225-315-6677

ttt
 

tttt bumpp bump

ttt
 

bump bump bump

ttt
 

bump bump bump

Bump/Update:

I took pictures to give everyone an idea of what is being offered and to give some confidence to those that might be interested. This camcorder is sitting with all its accessories in wrapping in the box. It's been used twice, 8 minutes to the heads in SD and thats it. Like I said I wish I could say this unit is "factory brand new" but its been used once and unpacked to an extent so its "almost like new". If you looking for the best used deal this is it, this thing has been barely touched, handled and has spent its life in the box. Looking to give this camcorder a new home and to someone who can really use it. I provided a picture of my invoice from B&H to prove its origin and its date of purchase. Thanks again!!!

Canon XH-A1 Sale pictures.
http://homepage.mac.com/gorskivideog...otoAlbum3.html

Mike Gorski

Ohmigod, Charles!

I'm an actor, and that trailer for Body Factory nearly made me pee my pants.

Great shooting!

Sorry to go off topic...