mic att on dsr-250 at DVinfo.net

Phil Mathews · June 16th, 2003, 09:14 PM

my wireless mic - samson micro 32 - just seems way too hot. Ony my pd150, there is a mic att setting that makes it work just fine. I do not see any mic att switch on the dsr-250 though.

In manual gain of course, I can get the level down just fine but there are lots of times I like to just use the auto setting. As I mentioned, the mic att setting on the pd150 takes care of this just fine. Can anyone suggest how to handel this on the 250?

Thanks...Phil

Mike Rehmus · June 16th, 2003, 10:02 PM

You can purchase a variable attenuator from Shure that will do what you want. It hooks in series with the signal going into the camera. Expect to pay around $50 for the unit.

June 16th, 2003, 09:14 PM	#1
Phil Mathews New Boot Join Date: May 2003 Location: Austin, TX Posts: 8	mic att on dsr-250 my wireless mic - samson micro 32 - just seems way too hot. Ony my pd150, there is a mic att setting that makes it work just fine. I do not see any mic att switch on the dsr-250 though. In manual gain of course, I can get the level down just fine but there are lots of times I like to just use the auto setting. As I mentioned, the mic att setting on the pd150 takes care of this just fine. Can anyone suggest how to handel this on the 250? Thanks...Phil

June 16th, 2003, 10:02 PM	#2
Mike Rehmus Wrangler Join Date: May 2002 Location: Vallejo, California Posts: 4,049	You can purchase a variable attenuator from Shure that will do what you want. It hooks in series with the signal going into the camera. Expect to pay around $50 for the unit. __________________ Mike Rehmus Hey, I can see the carrot at the end of the tunnel!