Re: Complete JVC-HM700 Kit
4 Attachment(s)
Finn,
I went over to my house today and took some measurements that you can see in the pictures. It looks like there's a two and a half inch space between the battery mounting plate and the back of the wireless receiver mount in the current configuration. However, you could always change the configuration. If you moved the wireless receiver over to the side bracket then it allows you to eliminate the rear and lower brackets and at that point you could put any size battery you like on there because it would be an open ended back. I ran a side bracket on my JVC-HD100 and it works fine. I also found the Anton Bauer adapter back so if someone buys the camera and wants it configured for the AB back then you would have the option of changing it over. When I first bought the camera it was set up that way and it only took me about twenty minutes to switch it out to the IDX. And that was me going very, very slowly because I didn't want to do anything wrong to my brand new camera. It was a piece of cake. |
Re: Sony NEX-FS700U Super 35 Camera Body + 2 Extra Batteries + Solid Camera Top Plate
A couple people have asked if I would consider selling the FS700 without the Solid Camera top plate. Price without the top plate would be $7,300.00.
|
Re: Lnib atomos samurai
***bump***
price reduced $1,250.00 + s/h. |
Letus Ultimate with 1/3" relay
I have now officially moved over to the large-sensor camp, but I have a practically mint-condition Letus Ultimate adapter with a 1/3" relay lens that I can sell together or separately. Make me an offer, and I will sell it to you for a steal under retail price. Email me through the forum for pictures. Thanks!
|
Canon C300 EOS used
Looking for a gently used Canon C300 EOS mount.
Fast. thanks! Bryan Harvey |
Re: Upgrade your wireless, Audio-Technica ATW-1821C
Items exactly as described. Used last week on a paid gig. Everything in perfect working order. Thanks for the awesome deal. Pleasure doing business. Would buy from you again in a heartbeat.
Aloha - Phil |
Re: Panasonic HMC40 (used)
Dropped to $950.
|
Canon t3i Body - Mint Condition
2 Attachment(s)
Body only. Used twice. In the box, with all accessories included.
$400 OBO |
RODE NTG-1 Unused
I have an unused RODE NTG-1 microphone for sale. It has all its original packaging.
Please get in touch: jtbranson@gmail.com Thanks, Joshua |
Sony Power Adapter/DC Charger/Light/Tascam USB Interface/Blue Snowball
I sold all my Sony FX-1 and Sony GV-HD700 gear over the summer and forgot about this box of accessories until I cleaned out a closet last weekend. I figured I should try and sell it instead of putting it back in the closet. All items aside from the CVX-V1 are in excellent condition and operate exactly as they did when they were new.
http://palisadeswbl.com/2013/TAS.jpg Tascam US-122MKii $40 plus shipping. I used this for two years w/o a problem until I installed Lion on my Mac Pro and then it stopped working, That is until I went out and spent $300 on a new USB audio interface, because a few weeks after the purchase I plugged the Tascam back in and it worked perfectly. http://palisadeswbl.com/2013/BLUE.jpg Blue Snowball $30 plus shipping. I have so many microphones. http://palisadeswbl.com/2013/SON1.jpg Sony AC-15B Power Adapter $15 plus shipping. I don't remember if this was for my FX-1 but it works with many Sony cameras. http://palisadeswbl.com/2013/SON2.jpg Sony DC-V700 $30 plus shipping. It will charge Sony NPF-L series batteries. http://palisadeswbl.com/2013/SON3.jpg Sony HVL-20DW2 Video Light $40 plus shipping. It uses a NPF-L series battery and mounts to top of the camera. http://palisadeswbl.com/2013/SON4.jpg CVX-V1 $20 plus shipping Mini-Cam, thumb sized and lightweight S-Video, Composite (RCA) video Resolution 470 lines. This thing was rode hard and put away wet, it still works but it has a slight abrasion on the lens, that effects 10% of the lens. You can still see the image just looks a little out of focus in the lower left hand corner of the screen. I tried to find a replacement lens for it (the lens just unscrews from the housing) with no luck. I'd like to do all the transactions via Paypal. I'll ship via USPS Priority so shipping will be anywhere from $6 to $12 depending on where you live and you'll have your item in four days or less from the time of the transaction. I'm in NY. |
Re: Audio-Technica AT803b Omni Lavalier Mic
Hi,
Can I plug them directly into the H4Nīs XLR port for power? Could you post some pictures as from the specs on the BH website I donīt fully understand what do you mean by power box. Do you mean the AT8531 power module? If so, do I really nee it if I plug the mics directly on the H4N XLR ports I might be interested in tasking 2. |
Re: Audio-Technica AT803b Omni Lavalier Mic
The AT803b mics I have for sale are the older model where the mic element is permanently attached to the power module and it didn't have a separate model number because it wasn't a separate part.
It's shaped like a box, so it requires a standard XLR female to XLR male cable to connect with your H4n. It's the same shape as the AT8531, Audio-Technica - Microphones, headphones, wireless microphone systems, noise-cancelling headphones & more : AT8531 : Power Module but mine are permanently attached to the thin lavalier element cable. Also these mics have a relatively low output level. They sound great with a mixer or preamp used to boost the level before sending it into the H4n. The H4n by itself doesn't have clean enough preamps to use with low output mics connected directly in most situations. I would consider the AT899 lavs based on your questions in the other thread in the audio section, but thanks for your interest in my mics for sale here and let me know if you might be getting a mixer or preamp for your H4n. The H4n really benefits from a clean external preamp for mics. |
Re: Sony Power Adapter/DC Charger/Light/Tascam USB Interface/Blue Snowball
email sent re Sony DC-V700 - thanks!
**** Oops, nevermind, it looks like that charger is DC only - I was looking for AC/DC. |
48" Rhino Slider PRO - BRAND NEW
Hello all,
I have a brand new 48" Rhino Slider Pro for sale. It is completely sealed and unopened from its original box, and for that reason, I do not have a photo. They are selling for $550 on the website. I am currently asking $475. If you are interested in the Rhino Slider Pro, why not save some cash? Will ship anywhere in the United States. At this time, no international orders please, Sorry. Thank you, ~Omar |
Vinten 2 Stage Vision 20 Tripod
5 Attachment(s)
For sale is my well used but still working great Vinten Vison 20 tripod. Cosmetically it is about a 5? The head will support up to 60 lbs. I believe. The legs are 2 stage carbon fiber with a floor spreader. There are some paint markings on it from a previous owner. Don't know why. Also included is the camera plate. This tripod is perfect for big, full size cameras, especially with a prompter. It's heavy, almost 20 lbs. I'm selling because I've moved down to a smaller camera and Vision 3 tripod. Shipping cost will be whatever the actual cost is. Payment via PayPal. Asking $1000 or best offer.
|
Panasonic BT-LH2600 26" HD monitor
2 Attachment(s)
Very little usage, excellent cosmetic and working condition. $1,750
|
Re: GoPro Hero HD (1st version) + Extras
price drop: $110 shipped.
|
Re: H2 Zoom Recorder
price drop: $110 shipped.
|
Red scarlet-x ti canon mount kit
5 Attachment(s)
$13,500 (AUS)
Includes: - Scarlet-X W/Side SSD And Lens Mount - Canon Ti 00571 - 120.3 hours - DSMC Side Handle - RED Bomb EVF LCOS with RED arm (5inch), Case & LCD EVF CABLE (right to right angle connection) - RED arm 9inch - 2x Red Volt batteries - DSMC Travel Charger - Redmag 1.8" SSD (4pack) - 64GB - Redstation Redmag 1.8" - AC Power Adaptor NEW - Wooden Camera Side Handle Cheese 7.5 x 4.8 x1.1 - Wooden Camera Top Handle Cheese 4.8 x 2.7 x1.9 - Wooden Camera Easy Top X Plate Comes in original scarlet box with hard cases for Bomb EVF and Redmag pack Buyer responsible for delivery and RED transfer fee not included. |
Re: Complete JVC-HM700 Kit
This camera has been sold. I still have a couple of items that the buyer didn't need because they already had them so I'll post those individually over the next couple of weeks. Thanks.
|
Blackmagic Intensity Shuttle- $50 shipped
1 Attachment(s)
Only $50 shipped! I've been clearing things out of the storage area and I came across this. It's become the most expensive, yet most interesting paper weight I've ever bought. This is the specs on this thing new: http://www.bhphotovideo.com/c/product/686585-REG/Blackmagic_Design_BINTSSHU_Intensity_Shuttle.html
However, I've found it to be a total piece of garbage. It requires a very particular USB 3.0 chipset to work and I made sure to purchase the exact mother board needed for this card back when I was building a desktop system. The big problem is that the software that comes with this thing is total junk. It's a mystery on how to get this thing to really capture and I've found it's hdmi connection to be extremely finicky. And the worst part is that this thing is in perfect working order! It's not broke, it's just that Blackmagic made some really horrid software to go with this thing and it's totally lacking in user friendliness. So my loss is your gain. If you want to spend fifty bucks on this bad-boy then have at it. I'll send you the card and the usb cable. You can download the software directly from Blackmagic so that you get the latest version. In all honesty this card might be the perfect display card for you because it has the ability to output via hdmi as well. Only you will know how to use this thing because it's so awesome that it's beyond the scope of my limited knowledge. PM me on this site or just reply right here on this thread and ask any questions you like. Thanks! |
Re: Blackmagic Intensity Shuttle- $50 shipped
email sent, would like to purchase. thanks!
|
Re: Blackmagic Intensity Shuttle- $50 shipped
Email received and the sale is pending. Thanks!
|
Re: Go Pro 2 3d Kit
Bump before going to eBay.
|
Re: Canon XL-H1 Package "the Signal" Camera
Bump before selling this one of a kind collectible on eBay.
|
Re: AJA Ki Pro kit
Bump before I put this up on eBay.
|
Re: Canon HV20
available or gone?
|
Re: Fuji HD broadcast lens
Yep, great lens. Got a chance to use the new HA14X4.5 a few months ago and unfortunately for me it costs close to 40k. I've also used this lens too and it's a great piece of glass. I have a friend who works for Fujinon who I asked what the difference is. I was told the only real difference is the tolerances to which they are built with. If you're an owner operator, meaning your're the only one using it, go with the ZA. If it's going to be rented and used by several other people go with the HA. Unfortunately the ZA doesn't come with the 14X.
David, I can't afford the $10.5K but would be willing to bargain if you are. Email me dan@dancrowell.com |
Ex1r
5 Attachment(s)
I hate to part with this camera, but it's just not getting enough use right now. This has been the B-cam to my other EX, and I just don't have enough demand for a second camera to justify keeping it. It's in great condition, with 350 hours on the clock. Having owned the original EX1 (non R version), I can undoubtedly say that this camera is a much easier to use and more well rounded camera. It is the camera that the EX1 should have been from the start. The addition of HDMI, the improved grip, pre-record, improved tripod mount and better rear viewfinder alone make it loads better than the EX1. This also is a great option for anyone eyeing a PMW200, but looking to save some money.
I'm including quite a bit of extras with the camera, and at this point, I am not willing to part out the kit. Here's a list of everything included as well as some pics. Asking $4850 for everything -EX1R camera (includes all original accs. and box) -Zoe EX zoom control -1x 16Gb SxS card -3x MxM adapters each with a 16Gb SDHC card -1x BP-U60 battery -2x Walkart batteries (BP-U90 equivalent) -Tiffen T1 Far Red Filter (on lens since day one) -Indirails shoulder rig -Frezzi mini light with dichroic filter, tekkeon battery and pelican case -16x9 camera case -Century optics wide-angle+super wide angle lens adapter (clamp on) -Hood Pro Sock loupe for LCD -2x LCD screen hoods (one Hoodman, one Cinetactics) -Kata Rain cover |
Re: Blackmagic Intensity Shuttle- $50 shipped
Item has been sold!
|
Re: Mole-Richardson Lights
I'm going to lower the price to $275 shipped. They work perfect.
|
Re: Blackmagic Intensity Shuttle- $50 shipped
George,
I'd like to know if you can get it to work, and with what computer. I have a Renesas USB 3.0 Lenovo and I've been looking at this capture device for some time, but didn't know if it would work on my laptop - nothing fancy to capture, just plain old SD video, so drive speed is not an issue. Thanks, |
Sale or trade: BlackBird Stabilizer
Full kit as shown here: http://www.bhphotovideo.com/c/product/684655-REG/Camera_Motion_Research_2050A_Blackbird_Camera_Stabilizer_Kit.html
$550.00 or will trade for pristine Canon 60D |
Re: Marshall LCD70P-3GSDI monitor
How about offers?
|
Re: Shake 4 Software
OK, I gave this away.
|
Re: EX3, Fujinon Len, Nano Flash, Canon HF-S30
Started a new add with leftover items.
|
Canon VIXIA S30 HD Camcorder
Canon VIXIA HF S30 HD Camcorder = $300
Original box with disk, manuals, and cables, remote Canon stock power adapter/charger Canon BP-808 stock battery Pearstone BP-827 high capacity battery Raynox 0.66x HD Conversion Lens 37mm B+W 58mm to 72mm step up ring 72mm lens cap B+W 72mm MC UV LowePro EX 120 holds camera and gear EWA Marine Rain Cover VG-1L Sony Sportspack Waterproof Housing SPK-HCE = $30 You pay insured shipping. I pay paypal at the above price |
Re: Lnib atomos samurai
****BUMP****
Price dropped to $1,150.00 + S/H. Make offer. |
Glidecam HD-4000 + Accessories
Glidecam HD4000 Stabilizer System
Manfrotto - 577 Rapid Connect Adapter with Sliding Mounting Plate (501PL) Glidecam Forearm Brace I purchased these items for a job and never used them other than setting things up. 759.40 (B & H) cost. Will sell for $600 (I will also cover UPS regular shipping) |
Re: Blackmagic Intensity Shuttle- $50 shipped
thanks Ben, arrived with today's mail. appreciate the prompt shipping.
Evan, the shuttle can be challenging to configure. i have an intensity pro on one pc and it does not always play nice. the shuttle requires a x58 chipset, will be setting it up on an Asus Rampage III Extreme LGA 1366 Intel X58 and will email you the results. i have heard of difficulty using these on a laptop but it can be done |
All times are GMT -6. The time now is 08:11 PM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network