I did the capture the images from XL1S to PC's Adobe and edited them.
The captured images were saved as .AVI format.

Then, I was trying to export the edited image(.AVI) to the DV Tape in XL1S from Premire.

I can see the blinking "DV IN" message on XL1S' EVF, but the EVF's color was stayed blue nothing else.

The export was not successful.

Could you tell me what I did wrong?

Is .AVI the best format for capture/export?

Can I use other format for the capture?

How about trying a crash edit?

This is done by simply putting the edit line at the beginning of the project, and then pressing the record button on the camera, then press space bar on the keyboard or the play button (footage has to be rendered first).

Or if you want the IEEE1394 cable to do it for you as long as you have rendered all the footage in Premiere, put the edit line at the beginning, select FILE, EXPORT TIMELINE, EXPORT TO TAPE, select ACTIVATE RECORDING DECK, click ok and hay presto it should be copying down to XL1.

.AVI format should be ok. To give you the best quality the footage should be captured at full DV resolution 720x576

Hope this helps, It works for me,

Ed Smith

I have Adobe premiere 6.5. When I go to render a project to either to tape or mpeg 1 or 2 files, it takes forever to do it...more that 4 hours for 10 mins of video.

This is what I have:
2.2 GHTZ AMD processor
768 DDR Ram
Fast hard drive with 8mb buffer and 7200 rpms.

I captured an 8mm poject on an analog capture card as an avi file. I used premiere to edit it and special effects.

When I go to do the output on tape or DVD, it's taking soo long to render. Am I doing something wrong here? It doesn't make sense why this would be taking forever to render. I consider my system I have pretty fast. I use pinnacle studio in the past and a 7 minute video took less than 15 mins to render but adobe is takiing too much time. Is it because the 8mm avi file has to be rendered or something in a different format before it can be rendered by adobe? Help!!

You mention effects. What are the effects, are they a major part of the production? If there are loads of effects in the production Premiere can take twice , 3 times or 10times to render than if there were none.

What codecs are you using to export to MPEG 1/2.

I take it by rendering you are meaning exporting?

How much space is there left on the hard drive you are rendering too?

You need at least 20% free plus how ever big your project might take up when exporting. You also need at least 2 harddrives, one for your system stuff the other dedicated to video.

Your computer specs seem fine.

Hope this might help,

Ed Smith

I am using the Microsoft codecs that come with 6.5.

When I render, I am guess that means the same as exporting to tape.

I have a total of 4 hard drives and the one I am using is not the same drive that my programs are on.

I have plenty of hard drive space.

I am using a lot of effects on the video. Film FX such as letter boxing, transistions, old film type effects with slow motion.

So are you saying that the effects will take a lot of time to render or export to tape? 7 minutes with about 13,700 frames worth would equal to about 5 hours of exporting or rendering? Ughh! There has to be a better way.

What suggestions would you recommend to speed up my process.? Better hardware and faster? I don't think there is anything that much faster than what I have for a PC. Infact my CPU is water cooled too.

I was wondering since I used the pinnalce studio 8 to capture my video with an ATI capture card and then importing into adobe premiere would have anything to do with the ridulculous exporting time? I need more advice..please.. thanks alot!

P.s. Would a DV Deck be better to capture anytype of analog video to a dv tape and then capture it from adobe premiere?

What codecs do you recommend to use? I really don't want to sacrifice quailty.

I am using a lot of effects on the video. Film FX such as letter boxing, transistions, old film type effects with slow motion.


There you go, that's why. FilmFX takes a lot of render time, plus slow motion and old effects would add some time too. I don't think there's very much you can do about it.. close your Monitor and Timeline windows before you render, sometime that helps speed it up a bit.

If you have something that's going to take a few hours to render, just do it overnight or while you're at work/school.

Alex is right, the more complex the effect the more Premiere has to render.

Another thing. By the sounds of things you are using a generic capture card i.e. the one which came with Studio 8, you do not get any real-time functionality from this. So every effect, every transition you put in Premiere you will have to render.

If you buy a capture card like Pinnacle Pro One RTDV, Matrox RTX 100 or Canopus DVstorm you will get real-time effects. This means that it will use the hardware to render and so saves you having to render at the end. However in most cases you will have to use the manufacturers plug-in effects that might be limited when trying to create a certain effect.

Try exporting it as a DV AVI file and see whether that is any quicker. Then import it into a fresh timeline and export to tape?

I have created a 1-minute video with 18 layers various effects, motion, picture in picture etc. At the time I was running Premiere on the Pinnacle studio 6 firewire capture card on an over-clocked Celeron CPU with 256MB RAM, it took over 4 hours to render it out and about 2 hours to export as an AVI file. In fact you can see the finished article on my website (the show reel download area).

Hope this might help,

Ed Smith

Thanks Ed,

So what you're telling me is that my capture card is whats slowing me down? I'm a little confused. I use my capture card to capture non-dv video and when the tape is being captured by my pinnacle card, it converts it to AVI file. After my AVI file is captured, I import it into Adobe 6.5 and add the effects then render or export it out to tape through my firewire or DVD media.

So I'm not really sure if that is what's slowing me down.

I don't know what happened or where i went wrong. But i need help so it doesn't happen again.

All the video I've captured in the past on my GL2 was brought in and no frame selecting for upper or lower for fields was nessesary. Now i have this footage from the weekend that is all jittery. What did i do? I was playing around with the effects and didnt totally turn one off, but it wasnt on. Coul dthis set this into motion?? Is it a setting on the camera that makes it record this way? Sorry, im still hazy on this and capturing. It is just weird. All the footage b4 this was ok and when captured, no field problems like this. I play around with aparatue alot and shutter speed, could this do it? I think I had it around 30fps. Any tips are appreciatted.

http://www.littlebearmedia.com/adam.htm

It would help if you told us a bit more about your setup. PC? Mac? Which NLE?

Definitely more info is needed. Define jittery. Are you seeing interlace artifacts (where you see lines in parts that are moving quicky?) If so that's normal and will go away when you watch the footage on a normal TV. It's because you shot in Normal mode instead of Frame Mode. If you shoot in Frame Mode, when you import into the computer you'll get perfectly formulated 30fps each time without interlacing artifacts.

Thank-you Peter.

I have been through multiple courses with NLE and this darn interlace thing has been a hil for me to understand. I understand that all frames on tv are showing 2 frames that interlace themselves for broadcast. And sometimes u have to set the frames to lower or upper fields to get rid of this artifacting.
I thought that frame mode was for viewing, not shooting. So if I wanted to watch it on a tv screen, what I shot and pause it...there would be no interlacing. But your actually telling me that I would capture non-interlaced footage in frame mode, which in turn would be clips without interlacing when i captured?? So i guess I can still recover this footage in premeire -or- is there a setting on the GL2 to import as non-interlaced?? Thank you so much for any and all tips. Ill play with this frame mode.

ps ~ im on a pc, windows 2000 pro, dual 1.8, raid drvies...but i think the interlacing as peter said is due to camera set-up

Interlacing has to do with the way the footage is shot by the camera, and the way it's displayed. Ideally, you want to display the footage the same way it was shot (interlaced or progressive (non-interlaced)).

Computer video screens are always progressive, and most NLE viewers don't interlace, so if you import interlaced footage you're going to see artifacts. But it has nothing to do with the way the footage is imported - you can't control the frame/normal setting anywhere except at the camera when you shoot. Once it's shot in that way, it's shot. You can convert with software but it's rarely very good. And you can never convert progressive to interlaced (you can, but it won't be 60 fps).

The reason you're seeing the wierd lines is because with interlacing, there are 30 frames per second shown but each frame is composed of two fields which are not at the same point in time. So at any given moment you're seeing 1/30 of the second but each field is only 1/60th of the second. On an interlaced TV monitor everything looks a little jittery close up so it's not a problem - you sit far away and it all blends together and the motion looks very fast and life-like (like watching sports).

Import that footage into an NLE, which wants to deal with 30fps and not 60fps, and you have to deal with these artifacts. It'll take every two frames and combine them to form one 720 x 480 picture. But since the two frames are not temporally identical, when there is motion of an object, the object in one field is displaced from its position in the other field, resulting in alternating lines where the object is in one position vs. the other.

There's little you can do about this, and if you're exporting back to TV, there's no reason to do anything about it - the artifacts will go away when you watch it on any TV. Sometimes Media Player will also show the footage in its proper interlaced format depending on the codec.

When you import the footage, usually you don't have to worry about field order - the default settings usually work right.

If you shoot in Frame mode, (and this can only be done at the time of the shot), you have no interlacing artifacts because, while the camera does take 60 fields per second of input, every two fields are temporally identical to each other and form a full, true image when put together. This also results in less smooth motion and mimics better the look of 24 fps film in that respect.

So if you shoot in frame mode, your footage will always look great on the computer or any other progressive source. *supposedly* the GL2 sacrifices a bit of resolution when capturing in frame mode but I've never noticed this myself. If you want life-like "sports"-look video, go with 60fps interlaced and just know that in full resolution it probably won't look right on the computer.

A friend of mine has Premiere Pro and I was able to work with it for the first time. I, myself, have been a long time user of Premiere 6.0 however last year made the switch to Vegas.

At first I enjoyed the familiarity of the interface. Once I started getting into editing I noticed lots of things I probably had previously gotten used to. For one the program seems a bit sluggish. There's a notable pause between hitting the space bar and the cursor actually starting to move- same with stopping it.

As I was moving through the interface and navigating around the screen paused...I still had a cursor but I couldn't click on anything. I thought to myself, "no way not a crash?!". To Premiere Pros credit it did not crash because after about 10 seconds I was able to start interacting with the interface again. Though this sort of thing is not acceptable. It acted just like 6.0 used to before it crashed with the whole non-responsive cursor.

I moved a digital image on the timeline and tried to create a make-shift photo montage. Something I've had a great deal of fun doing in Vegas. To my dismay the image didn't display correctly beings it was a much higher resolution than 720x480 NTSC DV. I guess I kinda got used to the way Vegas automatically formats images for output ratio. I had to manually resize it in the "motion" dialog to make it fit properly. Unless I was overlooking something. Plus I encounterd a weird flickering in the preview window that seemed to be intermittent when I hit stop then play again. Maybe just an odd glitch having something to do with how Premiere handles still photos.

I guess I was just a bit dissapointed beings it carried so much hype and I read previous reviews saying the interface was very quick and responsive making specific note that the delay I spoke of being eliminated....which it apparently wasn't. The interface just felt a bit sluggish and the pauses for no apparent reason were more than annoying.

Giving it the benefit of the doubt I wasn't working with it on a P4 w/ hyperthreading and the machine only had 512mgs of ram. Though a Vegas/FCP killer it is definitly not.

Thanks for your opinion. I had similar experiences with older
versions of Premiere and am not likely to return now that I'm
using Vegas as well.

I have 512 Meg of ram , Will increasing it to 1 Gig make any diffrence to the performance Premirer 6.5 ?
Thank you

Hi Thomas
More is always better in my (somewhat limited) experience. I was at 512, then went to 1 Gig back when I was using Premiere 6.0. It did make a difference--less hiccups, general better performance overall, less work for the hard drive(s).

Actually, I just ordered another 512 stick of Ram--going to be at 1.5 gigs soon. That should tell you what I think of more memory--the more the merrier. Plus, the price of the memory I use has come down about 20USD in the past 2 months.

You are going to get a very small performance increase if all your DIMMs are identical and in pairs. Ideal setups would be 2 identical DIMMs and 4 identical DIMMs. The difference is somewhere in the range of a few percent (like the difference between a Pentium 3.2 and 3.0). You probably will not notice the difference.

However having more RAM can give a HUGE performance increase, but only when the RAM is a bottleneck. When you run out of RAM your computer has to use the hard drive, which is slower than RAM by a factor of 60 or so.

I don't use Premiere 6.5 often (Pro, Vegas, Avid, FCP are all much better) so I don't know if it is a bottleneck if your system.

<<<-- Originally posted by Glenn Chan : but only when the RAM is a bottleneck -->>>

How can this be determined?


Also, my motherboard only has 3 slots for Ram (Asus P4PE). Does this mean that my best performance is only obtainable with 2, and not 3 sticks of memory?

Also, my motherboard only has 3 slots for Ram (Asus P4PE). Does this mean that my best performance is only obtainable with 2, and not 3 sticks of memory?
Oops I didn't think about AMD processors. The manual for that Asus board might say what the best performaning RAM setup is. It does for my Asus p4p800 (Intel 865PE chipset).

From what I gather, dual channel (2 identical sticks in the right slots) on AMD board makes very little difference unless you are running integrated graphics. If you already have one stick then I suppose you might as well find another stick of the same model.

<<<-- Originally posted by Glenn Chan : but only when the RAM is a bottleneck -->>>

How can this be determined?
Hmm I'm not sure how to check RAM usage.

The Asus P4PE is an Intel 845 chipset board. I have a Pentium 4 2.4Ghz running in it.

Hello.
i have been playing with my new camera and i don't understand why if i just take a clip that i shot and put it in premiere pro i have to render it.

just straight footage, no effect/transitions etc.

i did shoot it in 24p but not in 24p advanced.

i almost posted this in the dvx-100 forum but i just know it would have been moved in here anyway, so hopefully someone has a dvx-100 and understand what i mean by 24p non advanced and 24p advanced...

i am using a canopus raptor rt2 card and my project settings are the straightford 29.97

matthew

I'm trying to do in AFX in which a photoshop is animated....nothing fancy. However, I'm very aware of the color bleed when using a certain pigment of red. Just when I thought I found the winning combination i.e. no bleed, I brought my uncompressed AVI title into Premiere and rendered it. The static letters look fine but the animated ones look crappy. Does anybody know a pigment of red that I can use in Photoshop so my animated letters in AFX wont look like crap when I put them on the timeline in Premiere?

Thanks

Seth Peterson
www.sundevilpictures.com
www.govbot.net

what would be some of you all's recipe for doing time remapping? i want to use slow down to speed up clips as inserts in a music video. each clip would probably be only 3 sec. i want to get them on beat.

i'm thinking that i can edit it in premiere, cut a 3 second audio file plus a 3 sec video clip, export it to after effects and then adjust the footage without adjusting the audio, then i can just bring it back into premiere and match it's audio to the original spot where i clipped it and then the time remap should be the way i want it.

by the way i plan on using twixtor

Some background
I use a toshiba laptop, and for firewire connections i use a pcmia card that has two firewire A ports.

right now i have my dv camera attached to one port and an external HDD conneted to the other port.

1) how bad would this be?
2) when i try to capture in premiere it always gives me the "maximum filesize exceeded" error, what am i to do?

thank u for ur help in advance.

What's the length of the video you're trying to capture? And what file system are you using? (Fat32, NTFS). I know Fat32 has a 4gig limit, which might be the cause.

Hi,

does anyone use this plugin to do their encoding? If so I would really be keen to know what the best settings would be for maximum quality. I never do anything more than 1 hour so can afford max quality. I am a PAL user but that will only affect on or two settings.

Thanks
Andrew

MPEG-2 settings in various encoders are mostly the same so you should get some help from this link: http://dvd-hq.info/Compression.html
It describes settings in TMPGEnc but I've found it useful in other encoders, like the Main Concept plug-in in Premiere 6.5.

David Hurdon

Thanks David will go check it out.

To the best of my knowledge (when I looked at Ligos years ago)
it doesn't have that many settings. Bitrate is the main factor in
quality. If it does VBR encoding than that's better as well.

Well if you shot in 24p and your project is 29.97 you will ofcourse
need to render if you are outputting it as 29.97 movie. That would
be my "logical" guess (I don't own the camera myself). Or are you
exporting to something else? Why shoot in 24 if you are going to
output to 29.97?

To what codec did you render when going to Premiere? I assume
you had everything set to high quality?

Do you want to slow footage down or speed it up? Speeding
up is usually no problem and both can be done within Premiere
(but AE might have a higher quality). The most difficult is slowing
down since you can't record faster on DV camera's.

It shouldn't be bad at all, but there has been a report on the
forum before regarding something similar if I remember correctly.
What happens if you capture to something other than your
firewire harddisk?

thanks for everyones replies so far

well i got the hdd to work anbd the error no longer pops up. all i had to do was reformat the drive to NTFS instead of FAT32.

Now i have another problem and i think that the PCMIA card itself is having issues. It is more or less impossible to get two things to work at the same time on the card. I cannot capture from the Camera (connected to the pcmia card) to the HDD (also connected to the pcmia card), the premiere pro capture screen freezes.
Also I cannot burn a cd using an external DVD Burner (connected to the PCMIA's USB 2.0) when the files are being taken from the HDD (connected to the PCMIAs Firewire).

Is it that the PCMIA slot is being overloaded, or is the card itself having issues?
Save me??
Thanx

my understanding is that even though it shoots in 24p it adds copies of some frames to make it 29.97 for editing ease.

that is the difference between the 24p and the 24p advanced.

matthew

That's a very good question. Sounds like something cannot
handle the traffic and it might be the card or it might not be.
The only real way to be sure is to try different cards. I'm sorry
I can't be of any more help. Most laptop users have builtin
firewire port(s).

From AFX I rendered the title animation uncompressed. When you export anything into Premiere that is not Microsoft DV, Premiere requires you to hit the "render work area" button. Otherwise, a big fat red X is on screen and you cant watch anything through your production monitor.

Okay, so the problem is in the final render in Premiere? Keep in
mind that most things animated need motion blur and/or anti-
aliasing for it to look good! So what format are you rendering
to then?

I've personally not had a problem with computer generated
red before.... Only red coming from a camera

Hmmm.....motion bur....I'll have to try that.

Thanks

Hi guys,

Took a closer look at my Pro CD today, and found a third party plugin - "The Steady Move". It is a camera-shake-remover, and in my humble opinion it works very well. Much easier to use than using AE:s track motion/stabalize.

One thing though, when I installed it, it ended up in a strange folder, so I had to manually move it into Adobe/Premiere Pro/Plug Ins

Have fun!

// Lazze

i want to start off with a fast motion and then slow it down and then transition back into normal speed. i have been playing with the twixtor demo. it's a pretty hard to get the hang of.

Do keep in mind that a software stabalizer works by "zooming in"
a bit on your footage and thus you will loose resolution.

hi all,

I have shot my footages with the DVX100, PAL version in the 25p mode (Equivalent to the NTSC 24p mode)

Now I am editing it with Premiere Pro. And I could not figure out which settings to use under the custom settings for "New Project" so that I can maximise the quality during my editing. Here is my guess and please advise

Editing Mode: DV Playback

Timebase: 25frames/second (Because it is a PAL footage)

Frame Size: I cant change this because I chose the PAL-non widescreen setting

Pixel Aspect Ration: D1/DV PAL (1.067)

Fields: Lower Fields First. this was the default setting. (This is tricky to me as i read from a book that PAL video usually draws the upper field first. Should i change this? Also, there is another option "No Fields, Progressive scan". Should I use this since i shot in 25p mode, which is progressive scan? Or is it just for the NTSC 24p advance mode? PLEASE ADVISE)

Display Format: 25fps Timecode

Audio Sample Rate: 48000HZ. what does this number means??

Most of your settings are correct. You should indeed use
"No Fields, Progressive scan" since you shot in p (25p) mode.

48000 hz is the samplerate of the audio, meaning that each audio
channel has 48000 different steps per second. The higher the
better the audio will sound. DV audio is one of the following two:

1) 48000 hz, 16 bit, 2 channels (stereo)
2) 32000 hz, 12 bit, 2 or 4 channels (stereo)

Check your camera manual and settings to see which mode you
used to record the audio.

Ok i exported some clips out of premier pro to email my friend, and they came out very small, and the audio was kind of off. Does anyone know how to change the size and audio. Thanks

Were going to need more than that to supply you with a decent answer!

What settings have you got it set to?

How did you go about doing what you did?

Whats your PC spec?

How large do you want the file?

etc etc etc.

Cheers,

Ed

I just use settings that comes up when i go to export. I would like to have it twice as large as the defult they give you for quicktime.

Well change the bitrate to twice as much then.

hi all,

Blessed with the help of the experts in this forum, I managed to capture 1.5 hours of footage with NO DROP FRAMES!

However, its still too early to celebrate...problems aredy started coming as I did a trial edit.

1) How do i open a reference monitor in premiere pro? the "help" page says click on the "monitor windows pop up menu" and then select "new reference monitor" BUT I CANT FIND THAT POP UP MENU! some kind of help they offer

2) I was photography train and thus better in Photoshop. WHen i do stills, I can "tone" the pictures to give it a "feel". Something like the "tone" you see in "Band of brothers". Basically playing with layers. BUT how do i do that in premiere pro? I heard photoshop and premiere pro can work hand in hand to do that...but how? Do i import actions from photoshop and add as an effect?

Thanks again in advance!

cheers
Wan SHu